0

Plastic Testing Equipment

Showing 50 Items
ViewView
  1. 0.4 Measurement Accuracy Oxygen Index Testing Machine ASTM D2863 For Cables

    It is suitable for the determination of the combustion properties of materials such as plastics,rubber, fibers, foams, films and textiles, that is, the concentration percentage of the lowest oxygen in which the polymer just maintains combustion.
    Send Inquiry
  2. Electronic Notch Cutting Machine / Impact Specimen Notcher For Izod Charpy

    The electronic notching machine is used for the sample preparation of the non-metallic material when it is did the impact toughness testing by izod impact tester or the charpy impact tester.It can clamp 20 samples at a time, and the processing notch is more than 60 per 10 minutes. The notch size is accurate and the efficiency is high, which greatly reduces the intensity of operation.
    Send Inquiry
  3. Pharmaceuticals Or Plastic Testing Machine / Melting Point Instrument

    Melting point refers to the temperature at which a substance changes from a solid to a liquid, it is one of the important methods for measuring a substance and its purity. Melting point testers are used to test the melting points of plastics, pharmaceuticals, reagents, perfumes, dyes and other organic crystalline materials.
    Send Inquiry
  4. Digital Display Plastic Vicat Softening Point Tester / HDT Vicat Testing Machine

    Applications of Plastic HDT Vicat Softening Temperature Tester Heat Deformation Vicat softening temperature tester manufactured based on the latest international standards and national standards, mainly for determination of the heat distortion temperature and Vicat softening point temperature of plastics, hard rubber, nylon, electrical insulation materials, long fiber reinforced composite materials, high strength thermosetting laminates and other non-metallic. Conforms with ISO 2507, ISO 75, ISO 306, ASTM D1525, ASTM D648 Thermoplastics pipes and tubes - Determination of Vicat softening temperature (VST) and Thermal deformation (HDT).
    Send Inquiry
  5. ASTM D1052 Plastic Testing Machine Ross Shoe Sole Flexing Resistance Tester

    A right Angle of bending resistance such as rubber,sole pu and other materials.applies to test bending for rubber products, shoe soles, PU and other materials. Specimen after constant stretching, bending, Viewing its attenuation, damage and cracking.
    Send Inquiry
  6. DH-MI-BP Plastic Melting Flow Index Test Equipment

    The melt flow rate meter is a special instrument for determining the melt flow rate of a thermoplastic under certain conditions. It refers to a molten material extruded from a die of a specified length and diameter under a certain temperature and load. Mass flow rate MFR or melt volume flow rate MVR, which can distinguish the viscous flow characteristics of thermoplastics in molten state; it is of great significance for the quality assurance of thermoplastics and chemical fiber raw materials, products, etc., especially in quality. Inspection and warehousing testing.
    Send Inquiry
  7. DH-MI-BP Touch Screen Melting Flow Index Test Equipment

    The melt flow rate meter is a special instrument for determining the melt flow rate of a thermoplastic under certain conditions. It refers to a molten material extruded from a die of a specified length and diameter under a certain temperature and load. Mass flow rate MFR or melt volume flow rate MVR, which can distinguish the viscous flow characteristics of thermoplastics in molten state; it is of great significance for the quality assurance of thermoplastics and chemical fiber raw materials, products, etc., especially in quality. Inspection and warehousing testing.
    Send Inquiry
  8. High Accuracy IEC60695 Needle Flame Test Machine For Insulating Materials

    The needle flame tester uses a needle-shaped burner of a specified size (Φ0.9mm), with a specific gas (butane or propane), and directionalally ignites the sample at an angle of 45°, depending on whether the test piece and the ignition bedding layer are ignition and holding time and length of combustion to assess the risk of fire from small flames inside the equipment due to fault conditions.
    Send Inquiry
  9. COF Tester , Coefficient of Friction Tester Meter

    Professional Software, Communication Cable and Customized Sled of 500g
    Send Inquiry
  10. ASTM D 1646 Rubber Mooney Viscometer Test

    mainly for rubber and rubber products, plastics and articles polyolefins, PVC, film, sheet, profiles production and polymer blends, pigments, masterbatch, stabilizers, tranquilizers agent industry, its main purpose is After molding the test material, its physical properties change, contrast.
    Send Inquiry
  11. Digital Charpy Impact Testing Machine , LCD Plastic Testing Machine

    LCD digital-display Charpy and Izod impact testing machine is ideal for impact resistance test of ragid plastic, nylon, hard rubber, electrical insulation materials and other non-metallic materials under dynamic load. It is a indispensible need for Non-metallic materials manufacturer, quality inspection departments, and research units for new materials.Excellent function: printed output of test data.
    Send Inquiry
  12. Rubber Mooney Viscosity Meter

    Rubber Mooney Viscosity Meter / Tester , Mooney Viscosity Test Machine / Equipment / Instrument / Apparatus / Device
    Send Inquiry
  13. Automatical Plastic Testing Machine / Pipe Drop Weight Impact Test Equipment

    Pipe impact tester is designed according to the GB11548-89 /ISO 3127 and other standard, and fit for the impact testing of plastic and pipe, panels and relative product to measure the resistance to the external impact.
    Send Inquiry
  14. Plastic Pipe Drop Hammer Impact Tester , Falling Weight Impact Testing Machine

    It is suitable for the determination of impact toughness of PVC-U, PVC-C pipe, PP pipe, PE pipe, plastic pipe for underground communication pipe, etc.
    Send Inquiry
  15. Rubber No Rotor Rheometer Testing Machine

    The rotorless vulcanometer is the most widely used instrument for controlling rubber quality in the rubber processing industry, rapid inspection, and rubber basic research.
    Send Inquiry
  16. Charpy Impact Test Equipment

    This instrument is an impact testing machine with simple structure and convenient operation.It is used to test the impact toughness of rigid plastic, reinforced nylon, fiberglass, ceramics, cast stone, insulation materials and other non-metallic materials.
    Send Inquiry
  17. Custom Made Wall Thickness Meter Irregular Specimen For PET Drink Bottle

    DH-BTG is the ideal wall thickness measuring instrument for PET drink bottle,can,glass bottle,aluminum pot;it is application to measure the wall thickness of packing container with complex pattern;It has the advantage of user-friendliness,durability,high-precision,reasonable price;It is widely used in the manufacturing enterprise of glass bottle,plastic bottle,bucket,medicine,health care,cosmetic,drink,oil,liquor.,etc.
    Send Inquiry
  18. Lab High Temperature Muffle Furnaces Oven Chamber

    The product is suitable for elemental analysis, measurement and small size steel hardening, annealing, tempering, heat treatment and heating in laboratory, industrial and mining enterprises, scientific research units,can also be used for sintering of metal, stone, ceramic, dissolution analysis of high-temperature heating.
    Send Inquiry
  19. Gas Hydraulic Supercharged Punching Machine Pre - Pressing Force 2000N

    The pneumatic hydraulic press type punching machine is a multifunctional special equipment. A gas-liquid booster cylinder system is used. Suitable for blanking and pressing for metal, non-metallic materials, The machine is easy, quick and labor-saving, and has good stability.
    Send Inquiry
  20. MFR Melt Flow Index Tester

    The melt flow rate meter is a special instrument for determining the melt flow rate of a thermoplastic under certain conditions. It refers to a molten material extruded from a die of a specified length and diameter under a certain temperature and load. Mass flow rate MFR or melt volume flow rate MVR, which can distinguish the viscous flow characteristics of thermoplastics in molten state; it is of great significance for the quality assurance of thermoplastics and chemical fiber raw materials, products, etc., especially in quality. Inspection and warehousing testing.
    Send Inquiry
  21. Melt Flow Index Testing Equipment For Plastic

    Under the influence of moisture and impurity environment,for the electric products,different live parts,live parts and grounded metal parts may cause leakage of insulation, and the resulting arc may cause a breakdown short circuit or the discharge causes the material to erode,even ignites the fire.This testing instrument can do the destructive test for the insulation material through simulate the above conditions, to test and evaluate the relative tracking resistance of the insulator under the action of the electric field and the impurity-containing water under the specified voltage.
    Send Inquiry
  22. ASTM Falling Ball Impact Tester , Impact Test Machine

    his machine is suitable for impact strength testing of plastic, ceramic, acrylic, glass, lens, hardware and other materials and test coatings.This machine adopts DC electromagnetic control method. The steel ball of the required weight is placed under the electromagnetic suction cup, the steel ball is automatically sucked up, pressing the falling key,the steel ball is released by the suction cup. The steel ball will do free fall testing. and impact the surface of the piece. The drop height can be adjusted up and down, a height scale is attached to know the drop height of the product.
    Send Inquiry
  23. Pneumatic Press Plastic Rubber Slicer

    Dumbbell Pneumatic Sample Cutter uses pneumatic as motive power and it can operate once connect to the air pressure source. Dumbbell Pneumatic Sample Cutter can be appliable in cutting rubber,adhesive tape,leather.the experience will use dumbbell specimen and other special material, such as laminate board and series of composite material.
    Send Inquiry
  24. High Accuracy IEC60695 Needle Flame Test Machine For Insulating Materials

    The needle flame tester uses a needle-shaped burner of a specified size (Φ0.9mm), with a specific gas (butane or propane), and directionalally ignites the sample at an angle of 45°, depending on whether the test piece and the ignition bedding layer are ignition and holding time and length of combustion to assess the risk of fire from small flames inside the equipment due to fault conditions.Needle flame tester is suitable for lighting, low-voltage electrical appliances, household appliances, machine tools, electrical machinery, power tools, electronic instruments, electrical instruments, information technology equipment, electrical affairs equipment, electrical connectors, accessories and other electrical and electronic equipment and components, also suitable for insulating materials, engineering plastics or other solid combustible materials industries.
    Send Inquiry
  25. Plastic HDT Vicat Testing Machine , Digital HDT Heat Distortion Vicat Softening Point Apparatus

    t is mainly used for the determination of heat distortion temperature and Vicat softening point temperature of non-metallic materials such as plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting laminates. It is easy to operate and precise in control. It is a highly intelligent test instrument widely used in colleges and universities, research institutes and product quality supervision and inspection units.It adopts PC control, digital display dial gauge to measure deformation, real-time curve drawing, and the test data is processed twice directly on the PC. The test data can be imported into the OFFICE software for editing and layout.
    Send Inquiry
  26. Horizontal Vertical Combustion Testing Equipment Burn Resistance Measurement

    The equipment is beautiful in appearance, reasonable in internal structure, simple and quick in operation, accurate in testing, and widely used by wire and cable manufacturers, universities and commodity inspection departments.
    Send Inquiry
  27. Solid Insulation Materials Electric Leakage Tester Tracking Index Apparatus

    This Tracking apparatus is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator and mainly used test the resistance Tracking Performance of solid electrical insulation materials when they are exposing in electric affect impurity water situation.Mainly used for determination PTI and CTI items.
    Send Inquiry
  28. Plastic Glow Wire Analysis Apparatus Measurement Glow Wire Test Iec 60695

    Glow Wire Tester could be applicable to ignition hazard test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique.
    Send Inquiry
  29. AC 220V 50Hz Plastic Testing Machine , Polycarbonate Glow Wire Measuring Device

    The device is designed to carry out fire hazard testing on electrotechnical products in accordance with the provisions of International standards.
    Send Inquiry
  30. DH-MI-BP Thermoplastics Melt Index Tester

    The melt flow rate meter is a special instrument for determining the melt flow rate of a thermoplastic under certain conditions. It refers to a molten material extruded from a die of a specified length and diameter under a certain temperature and load. Mass flow rate MFR or melt volume flow rate MVR, which can distinguish the viscous flow characteristics of thermoplastics in molten state; it is of great significance for the quality assurance of thermoplastics and chemical fiber raw materials, products, etc., especially in quality. Inspection and warehousing testing.
    Send Inquiry
  31. DH-MI-BP Leading Manufacture Offer Melt Flow Rate Meter With Best Quality

    The melt flow rate meter is a special instrument for determining the melt flow rate of a thermoplastic under certain conditions. It refers to a molten material extruded from a die of a specified length and diameter under a certain temperature and load. Mass flow rate MFR or melt volume flow rate MVR, which can distinguish the viscous flow characteristics of thermoplastics in molten state; it is of great significance for the quality assurance of thermoplastics and chemical fiber raw materials, products, etc., especially in quality. Inspection and warehousing testing.
    Send Inquiry
  32. DH-MI-BP Electronic Digital Plastic Material Melt Flow Index Testing Instrument

    The melt flow rate meter is a special instrument for determining the melt flow rate of a thermoplastic under certain conditions. It refers to a molten material extruded from a die of a specified length and diameter under a certain temperature and load. Mass flow rate MFR or melt volume flow rate MVR, which can distinguish the viscous flow characteristics of thermoplastics in molten state; it is of great significance for the quality assurance of thermoplastics and chemical fiber raw materials, products, etc., especially in quality. Inspection and warehousing testing.
    Send Inquiry
Contact Us

Floor 8th, HengMei Building, No 81, GuanTai Road, Nancheng District, Dongguan, Guangdong, 523071, China
Phone :86-769-22403424