- 1999.00 - 4999.00 USD ($)
Tower Type UV Light Aging Testing Chamber Ultraviolet Weathering Tester
UV testing chamber is suitable for testing the aging degree for the materials or the products in the climate condition of sunlight,temperature,humidity,condensation
and rain.,etc.Can get the result of color changing,color fading,dulling,chalking,
cracking,muddy,fragility,alveolation,strength retrogression and oxidation .,etc.
(1).The installation thickness is adjustable;Easy installation.
(2).Upward spinning door is not in the way of users to operate machine;The machine is only took very small space.
(3).By using special cooling system,the ordinary tap water is allowed to be used.
(4).Very convenient software program;Will automatically alarm if operate wrongly or machine breakdown;light intensity can be programmed.
(5).The lifetime of tube can be extended if has radiation calibrator.(more than 1600 hours)
(6).Can be divided into ordinary type,light irradiation controlling type,spraying
ASTM G 153, ASTM G 154, ASTM D 4329, ASTM D 4799, ASTM D 4587, SAE, J2020, ISO 4892 All current UV aging test standards.
The light source uses 8 imported UV fluorescent lamps with a rated power of 40W as the light source. Ultraviolet fluorescent tubes are distributed on both sides of the machine, 4 on each side. There are UVA-340 and UVB-313 light sources for users to choose from. The luminescence spectrum energy of the UVA-340 lamp is mainly concentrated at the wavelength of 340 nm, and the luminescence spectrum of the UVB-313 lamp is mainly concentrated near the wavelength of 313 nm. We use the UVA-340 lamp because the fluorescent light energy output will gradually decay with time. In order to reduce the impact of the test due to the attenuation of light energy, this test box is every 1/1 of all eight lamps. When the fluorescent lamp of 4 is used, an old lamp is replaced by a new lamp, so that the ultraviolet light source is always composed of a new lamp and an old lamp, thereby obtaining a constant output light energy. The effective life of the lamp can be around 1600 hours.
Studio size:1140mm x 400mm x 380mm
Dimensions:1300mm x 500mm x 1460mm
Center distance of the lamp:70mm
The distance between the specimen and the nearest parallel surface of the lamp surface:About 50mm
Wavelength range:UV-A wavelength range is 315-400nm/UV-B wavelength range is 290-313nm
Radiation intensity:1.0W/m2 can be adjustable
Light temperature range:50 - 70 degree
Condensation temperature range:40 - 60 degree
Temperature control method:PID self-tuning temperature control mode
- 300 Per Month
- 7 Days
- All India